• OVERVIEW
  • TECHNICAL SPECIFICATION
  • DELIVERY

Stainless steel housings

MicraSteel

The MicraSteel Series is a range of high pressure housings manufactured from 316L stainless steel, specifically for specialist gas applications.

 

All MicraSteel Housings are suitable for use with MicraTube, MicraLescer and MicraMesh, dependent on the specific application.

 

  • Available in 100 and 350 barg pressure ranges
  • All pipe connections are NPT taper threads as standard. Other thread forms are available on request
  • All MicraSteel filter housings are supplied with a manual drain and a Viton seal

 

Micrafilter recognises that standard products are not always suitable for all applications.  For specialist requirements please contact the Micrafilter sales team.



Pressure Size Qty  

Filter Housing Model Pipe Size (NPT) Flow Rate Dimensions mm (inches)

 

Cartridge Size mm (inches) Mounting Bracket
  Nm/hL/minSCFMABCD  
MST-102-2564-[Grade] 1/4 29 481 17 65 (2.6”) 20 (0.8”) 135 (5.3”) 70 (2.8”) 25 x 64 (1” x 2.5”) MBK2
MST-104-2564-[Grade] 1/2 60 991 35 65 (2.6”) 20 (0.8”) 135 (5.3”) 70 (2.8”) 25 x 64 (1” x 2.5”) MBK2
MST-102-2187-[Grade] 1/4 34 566 20 65 (2.6”) 20 (0.8”) 250 (9.8”) 180 (7.1”) 25 x 178 (1” x 7”) MBK2
MST-104-2178-[Grade] 1/2 90 1500 53 65 (2.6”) 20 (0.8”) 250 (9.8”) 180 (7.1”) 25 x 178 (1” x 7”) MBK2
MST-351-1232-[Grade] 1/8 8.5 141 5 41 (1.6”) 10 (0.4”) 78 (3.1”) 35 (1.4”) 12 x 32 (0.5” x 1.2”) MBK1
MST-352-1232–[Grade] 1/4 11 169 6 41 (1.6”) 10 (0.4”) 78 (3.1”) 35 (1.4”) 12 x 32 (0.5” x 1.2”) MBK1
MST-351-1257-[Grade] 1/8 12 198 7 41 (1.6”) 10 (0.4”) 103 (4.1”) 60 (2.4”) 12 x 57 (0.5” x 2.2”) MBK1
MST-352-1257-[Grade] 1/4 29 481 17 41 (1.6”) 10 (0.4”) 103 (4.1”) 60 (2.4”) 12 x 57 (0.5” x 2.2”) MBK1
MST-354-2564-[Grade] 1/2 60 991 35 65 (2.6”) 20 (0.8”) 135 (5.3”) 70 (2.8”) 25 x 64 (1” x 2.5”) MBK2
MST-354-2178-[Grade] 1/2 90 1500 53 65 (2.6”) 20 (0.8”) 250 (9.8”) 180 (7.1”) 25 x 178 (1” x 7”) MBK2
 

Ordering

Each MicraSteel filter housing is supplied individually. Filter cartridges must be ordered separately.

For more information consult the MicraTube, MicraLescer and MicraMesh data sheets.

If a PTFE seal is required for FDA approval include suffix [F].



Technical Notes
1.   The drain connection size is the same as the pipe size expect for the MST-354 models which are all 1/4” NPT

 

Specification 100 Barg Model 350 Barg Model
Model MG-102 & 104 MST-351, 352, 354
Filter housing material 316L stainless steel 316L stainless steel
Maximum operating pressure 100 barg (1450 psig) 350 barg (5075 psig)
Seal material Viton (standard) PTFE (optional) Viton (standard) PTFE (optional)
Temperature range* 0°C to 200°C (32°F to 392°F) 0°C to 200°C (32°F to 250°F)

  * Maximum temperature is dependent on final configuration, filter cartridges and seals.

 

Flow Conversion Chart For maximum flow rate multiply model ‘flow rate’ in the table by the correction factor closest to the actual working pressure
Operating pressure barg 1 2 4 7 10 15 20 50 100 150 250 350
    psig 15 30 60 100 150 200 300 750 1500 2000 3500 5000
Correction factor   0.3 0.2 0.75 1 1.2 1.5 1.7 2.5 3.5 4.5 6 7  

For 350 barg models only

Example ApplicationsExample Industries
Gas analysisAlternative fuels
Liquid analysisAutomotive
Emission monitoring and analysisChemical manufacturing
Sample analysisCNG services
Stack gas samplingCompressed air and gas
Instrumentation filtrationElectronics
Laboratory point of use protectionFood processing and packaging
Critical instrumentation protectionLaboratories
General in-line and process protectionOil refinery
 Pharmaceutical
 Power generation
 Waste disposal

 For information regarding specific applications not listed please contact Micrafilter.

Click to Zoom